manualshive.com logo in svg

Bosch rexroth A4VSH Series, Инструкция по эксплуатации

Поделиться
Скачать
Bosch rexroth A4VSH Series Скачать руководство пользователя страница 37

RE 92110-01-B/2022-03-22, Bosch Rexroth AG

 

Assembly | 

A4VSH series 1x and 30 37

/64

1

1

1

2

3

2

1

Fig� 11: Removing transport protection

1 

Protective covers 

2 

Protective plugs/threaded plugs

3 

Protective cover for through drive

Ports intended for connecting lines come with protective plugs and/or threaded 
plugs, which serve as transport protection. Make sure all ports required for 
functional operation are connected (see Table 11 "Ports A4VSH series 1x and 30" 
on page 40). Failure to do so could lead to malfunctions or damage. If a port 
is not being used, plug it with a threaded plug since the protective plugs are not 
pressure-resistant.

Adjusting the setting screws will render the warranty void. If you need to 
change the settings, please contact your local contact person; you can find their 
contact information at 

https://addresses.boschrexroth.com

3� 

For versions with through drive, install the auxiliary pump according to the 
pump manufacturer's manual. The protective cover (

3

) is not pressure-resistant 

and should not be used during operation. O-ring and mounting bolts are 
included in the scope of delivery.

Содержание rexroth A4VSH Series

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды