Bosch Rexroth 2AD Скачать руководство пользователя

Страница: 17 / 64

Safety Instructions

2.1

About this Chapter

Please observe the general safety instructions in this chapter and the safety-

related guidelines and handling instructions in this manual. This will prevent

personal hazards, material damage and errors.

This manual must be stored by the user during the whole product

lifetime and passed on when selling.

2.2

Appropriate Use

Prerequisites for appropriate and safe use of the motors are proper transport

and storage, correct assembly and connection and careful maintenance and

operation.
The motors have been designed for installation in industrial machinery. The

motors comply with the following standards and directives.
Standards

EN 60034-1

Rating and performance

EN 60034-5

Degree of protection

Directives

2006/95/EC
(Appendix III B)

Low Voltage Directive

The machine manufacturer must evaluate the electric and mechanic safety

as well as environmental influences in the assembled state of the machine

according to the Machine Directive 2006/42/EC and DIN EN 60204-1 (Safety

of Machines).
The electric installation must comply with the protection requirements of the

EMC Directive 2004/108/EC. The proper installation of the system (for in‐

stance physical separation of signal and power cables, use of shielded ca‐

bles ...) is the responsibility of the plant manufacturer. The converter manu‐

facturer's EMC instructions must be observed.
The machine may not be commissioned before conformity with these direc‐

tives has been determined.

2.3

Non-Intended Use

Any use of the 2AD motors outside of the specified fields of application or un‐

der operating conditions and technical data other than those specified in this

documentation is considered to be "inappropriate use".
Unless explicitly provided for this purpose, the motors may not be used in ex‐

plosion-hazardous areas.
Direct operation on the three-phase network is forbidden.

Property right of third party

When compositing and using each components of Bosch Rexroth, absolutely

observe the property right of third party. For any violation of such rights, the

customer is liable for the resulting damage.

DOK-MOTOR*-2AD********-IT01-EN-P
Rexroth 2AD Asynchronous Housing Motors

Bosch Rexroth AG

15/61

Safety Instructions

Courtesy

CMA/Flodyne/Hydradyne

▪

Motion

Control

▪

Hydraulic

▪

Pneumatic

▪

Electrical

▪

Mechanical

▪

(800)

426-5480

▪

www.cmafh.com

Содержание Rexroth 2AD

































































Результаты поиска

Содержание Rexroth 2AD

Отзывы:

Похожие инструкции для Rexroth 2AD

Бренды по названию

Популярные бренды

Bosch Rexroth 2AD, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth 2AD

Отзывы:

Похожие инструкции для Rexroth 2AD

Бренды по названию

Популярные бренды