Bosch Rexroth 1MB Скачать руководство пользователя страница 49

Страница: 49 / 68

Maintenance and repair

8.1

Cleaning and servicing

Danger! Electric voltage! Operations in the vi‐

cinity of live parts are extremely dangerous.

WARNING

Any work required on the electric system may be carried out

only by skilled electricians. Tools for electricians (VDE tools)

are absolutely necessary.
Prior to commencing work:

1. Isolate (even auxiliary circuits).
2. Secure against reactivation.
3. Ensure de-energization.
4. Ground and short-circuit.
5. Cover or shield any adjacent live parts.

Personal and material damage during main‐

tenance work in operation!

WARNING

Never do any maintenance work on life machines.
While carrying out maintenance work, secure the machine

such that it cannot restart or be used by unauthorized per‐

sons.

Hot surfaces with temperatures over 70 °C

may cause burns!

CAUTION

Before you work in the machine, let the motor cool down.
Wear safety gloves.
Do not work on hot surfaces.

Motors

Excessive dirt, dust or chips may adversely affect the functionality of the mo‐

tors and, in extreme cases, even cause a failure of the motors. Clean the mo‐

tors at regular intervals (after one year at the latest) to reach a sufficiently

high heat emission surface. If the cooling fins are partially covered with dirt,

sufficient heat dissipation via the ambient air is no longer ensured.

Connection cable

Death by electrocution possible due to live

parts!

WARNING

Immediately put the machine out of operation and replace

defective connection cables.

Never do any provisional repairs on the connection cables.

●

Check in regular distances the connection cables on damage and re‐

place them if necessary.

●

Check optionally existing drag chains (Drag chains) on defects.

●

Check the protective conductor connection for proper condition and firm

seating at regular intervals. Replace it, if necessary.

1MB Asynchronous Spindle Motors

35/53

Maintenance and repair

R911337309_Edition 03 Bosch Rexroth AG

Содержание Rexroth 1MB





































































Результаты поиска

Содержание Rexroth 1MB

Отзывы:

Похожие инструкции для Rexroth 1MB

Бренды по названию

Популярные бренды

Bosch Rexroth 1MB, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth 1MB

Отзывы:

Похожие инструкции для Rexroth 1MB

Бренды по названию

Популярные бренды