16/46 Operation
Bosch Rexroth AG
, RE 51550-B/09.2019
5.1.4 Active key lock
If the key lock is activated, the display
appears instead of the main menu
when the menu is called up with the
q
key. The active digit is identified by a point.
▶
Enter the code with the
p
and
q
keys and confirm with the
u
key. The active digit
moves one position to the right. After entry of the third digit, the main menu is
opened.
If the numerical code is entered incorrectly, the device returns to the measured value
display. If you have forgotten your password, you can access the menu at any time
with master code 287.
You can cancel the key lock by resetting the code in the menu item
lOC
in the
submenu Basic settings Advanced functions
B.ef
by entering 000.
5.1.5 Menu overview
The structure of the menu is based on the VDMA standard sheet 24574-1.
The menu has a hierarchical structure. The top menu level contains the main menu
items, e.g.
hUMi
,
TeMp
,
B.ef
,
DIa
,
e
. Each main menu contains further submenu
items.
The menu items can vary depending on the configuration of the device. Not all menu
items described in the following may apply to your device.
You can call up the configuration by pressing the
p
key in the display mode. A 4-digit
code is displayed, e.g.
Here the 4 digits mean tsav:
t: Type
h= humidity and temperature
measurement
2 or 4
s: Number of switching outputs
0 or 2
a: Number of analog outputs
i = standard assembly
(tank installation)
v: Assembly type of the device
r = remote installation
