background image

PAVIRO Call Stations

Safety | en

9

Bosch Security Systems

2018.04 | 04 | F01U306899

!

Warning!

To prevent fire or shock hazard, do not expose units to rain or
moisture.

!

Warning!

Installation should be performed by qualified service personnel
only in accordance with the National Electrical Code or
applicable local codes.

!

Warning!
Power disconnec

t: If the apparatus is mains powered and a

power supply cord set is provided, the disconnect device is the
mains plug of the power cord set.
If an AC‑DC adapter is provided and the mains plug that is part
of the direct plug‑in device, the AC‑DC adapter is the
disconnect device.
The socket outlet shall be near the apparatus and shall be
easily accessible.

!

Warning!

To avoid electric shock, do not connect safety extra-low voltage
(SELV) circuits to telephone-network voltage (TNV) circuits.
LAN ports contain SELV circuits, and WAN ports contain TNV
circuits. Some LAN and WAN ports both use RJ‑45 connectors.
Use caution when connecting cables.

Old electrical and electronic appliances

Electrical or electronic devices that are no longer serviceable
must be collected separately and sent for environmentally
compatible recycling (in accordance with the European Waste
Electrical and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should use
the return and collection systems put in place in the country
concerned.

Содержание PAVIRO PVA-15CST

























































Отзывы: