Bosch NITP669SUC, Инструкция по использованию и уходу

Страница: 30 / 80

30
4.
Set the value ³ in the settings area.
³
flashes in the cooking position display.
5. If the appliance is not yet connected to your home
network, press the WPS button on the router within the
next 2 minutes.
The cooktop will be connected to your home network
and the value
›
will appear on the cooking position
display. The process of connecting to the hood starts
automatically and is active for 2 minutes.
If the appliance is already connected to your home
network, proceed to the next step.
6. Initiate the process for connecting to the hood.
7.
Once the cooktop is connected to the hood, the value
´
appears in the cooking position display. After you
exit the settings menu, the symbols for the cooktop-
based hood controls are displayed in the cooktop's
control panel.
Note: Connection can only be established when both
appliances are connected to your home network and the
connection process has been initiated for both of them. If
the connection process has already timed out for one of
the two appliances, try to connect again (basic settings,
Œ³±
setting).
Disconnecting from the Network
You can reset the connections you have saved for your
home network and hood at any time.
1. Turn on the cooktop.
2.
Touch and hold the kitchen timer key for 4 seconds.
The product information is displayed.
3.
Touch the kitchen timer key repeatedly until
Œ
and
³±
are displayed alternately.
4.
Set the value ¯ in the settings area.
The connection has been deleted.
Controlling the hood via the cooktop
In the cooktop's basic settings, you can configure what
the hood should do when the cooktop or individual
cooking positions are switched on or off.
You can select other settings using the control panel.
Setting the fan
Activation
1. Touch the hood control key.
2.
Select the fan setting.
You can choose between the levels 1, 2 and 3. To
select the levels Boost and PowerBoost, touch buttons
4 or 5, or touch the speed boost key repeatedly until
the required intensive level is set.
The fan has been activated.
Deactivating
1. Touch the hood control key.
2.
Select fan setting 0.
The fan has been deactivated.
Setting Automatic Mode
Activation
Touch the hood control key until the ! symbol appears
on the control panel.
The fan will start up automatically when steam is
produced.
Deactivating
Touch the hood control key until the ! symbol goes out,
or select another fan level.
Automatic mode is deactivated.
Setting the hood lighting
You can switch the hood light on and off via the
cooktop’s control panel.
Touch the
hood light key.
Hood control settings
You can adjust the cooktop-based hood controls to suit
your requirements at any time.
Note: The settings will only be displayed if the appliance
is connected to a hood.
Symbol Function
Œ³±
Cooktop-hood connection
¯
Not connected / disconnect.
³ Connect.
›
Connected to home network (Wi-Fi).
´ Connected to hood.
Œ³µ
Automatic fan switch-on
¯ Switched off.
The hood must be switched on manually if
needed.
³
Switched on in automatic mode.*
In automatic mode, the hood switches itself on
when a cooking zone is switched on.
› Switched on in manual mode.
The hood switches itself on with a default set-
ting when a cooking zone is switched on.
Œ›¯
Delay shut-off
¯ The fan switches itself off when the cooktop is
switched off.
³
Switched on in automatic mode.*
› Switched on with standard delayed shut-off.
´
No change in settings.
Œ›³
Switch light on automatically
¯
Switched off.
³ Switched on.*
The light switches itself on when the cooktop
is switched on.
* Basic setting