NetDVR
| User’s Guide | Introduction
8
Bosch Security Systems | 2004-01
1.2 Unpacking
Unpack carefully and handle the electronic equipment with care to prevent damage. Check
for the following items:
•
NetDVR
•
Crossover cable, 1 m (red)
•
Direct cable 2 m (white)
•
Adapter and Power cable (12V DC, 3.5A)
•
Software
•
Manual
Note:
Save the packaging materials for future use if the unit needs to be shipped for service or repair.
1.3 NetDVR Descriptions
1.
Hard Disk Rack with lock (A).
Rear View:
2. Relay output (Alarm Out).
3. Sensor input.
4. Serial communication (RS232, RS 485, RS 422).
5. Base band video inputs.
6. Video input termination switch.
7. Ethernet Network.
8. Power supply input, 12Vdc, 3.5A.
Front View:
Operation:
PWR
= Power ON indicator
RUN
= Internal processor is working when ON
REC
= Unit is recording when ON
CMPR
= Unit is compressing images when ON
Video Input:
Indicator is ON for the enabled video input channels
Sensor Input:
Indicator is ON when event is detected on the input
Alarm Output:
Indicator is ON when relay output is active
A
1
BOSCH
2
3
4
5
8
7
6
NetDVR.book Page 8 Wednesday, May 12, 2004 4:06 PM