Bosch NetDVR Скачать руководство пользователя страница 44

Страница: 44 / 52

NetDVR

| User’s Guide | Playback

Bosch Security Systems | 2004-01

5.6.4 (4) Hair line for frame movement

•

Use the hairline scroll bar to move to the relevant frame. The hairline can be moved by
dragging it to the required time or my clicking on the required time or on the frame.

5.6.5 (5) Total recorded status indication

•

The color density of the frame information bar indicates frame rate. As the recording
rate is higher, the color of the bar becomes denser (darker).

•

If Motion Detection or a Sensor is activated, the status information bar is colored red at
that point.

5.7 Disconnecting

•

Click the connect button again

•

Click on the OK button in the disconnect
dialogue screen.

5.8 Link to Live viewer

Click on the live Monitor Viewer button

to connect directly to the live viewer

without logging in.

NetDVR.book Page 44 Wednesday, May 12, 2004 4:06 PM

Содержание NetDVR





















































Результаты поиска

Содержание NetDVR

Отзывы:

Похожие инструкции для NetDVR

Бренды по названию

Популярные бренды

Bosch NetDVR, Руководство пользователя

Результаты поиска

Содержание NetDVR

Отзывы:

Похожие инструкции для NetDVR

Бренды по названию

Популярные бренды