background image

IP Matrix

Preface | en

5

Bosch Security Systems

Installation and Operating Manual

F.01U.082.117 | V4.0 | 2008.12

1

Preface

1.1

About this Manual

This manual is intended for persons responsible for the configuration and operation of the 

IntuiKey keyboard when used with BVIP units (Bosch Video over IP) and the optional IP Matrix 

function. This manual describes the configuration of IP Matrix and the associated 

configuration and operation of the IntuiKey keyboard. Relevant knowledge of network 

technology is required.

See also the documentation on the IntuiKey keyboard and any other associated units. Read 

and pay particular attention to the safety instructions.

1.2

Conventions in this Manual

In this manual, the following symbols and notations are used to draw attention to special 

situations:

1.3

Intended Use

IP Matrix enables automatic and manual selection and assignment of the cameras and 

monitors belonging to a CCTV system via data networks (Ethernet LAN, Internet). To do this, 

all cameras and monitors must be connected to BVIP units (Bosch Video over IP). After 

completing configuration, all functions are performed using the IntuiKey keyboard, which 

must be connected with a BVIP decoder (for example VIP XD).

In the event of questions concerning the use of IP Matrix that are not answered in this manual, 

please contact your sales partner or:

Bosch Security Systems

Robert-Koch-Straße 100

85521 Ottobrunn

Germany

www.bosch-securitysystems.com

1.4

Rating Plate

For exact identification of the IntuiKey keyboard in use, the model name and serial number are 

inscribed on the bottom of the housing. Please make a note of this information before 

installation, if necessary, so as to have it to hand in case of questions or when ordering spare 

parts.

!

CAUTION! 

This symbol indicates that failure to follow the safety instructions described may endanger 

persons and cause damage to the unit or other equipment.

It is associated with immediate, direct hazards.

i

NOTICE! 

This symbol refers to features and indicates tips and information for easier, more convenient 

use of the unit.

Содержание MVC-FIPM



























Отзывы: