Bosch MVC-FIPM, Инструкция по установке и эксплуатации

Страница: 17 / 26

IP Matrix Operation of IP Matrix using the IntuiKey | en 17
Bosch Security Systems Installation and Operating Manual F.01U.082.117 | V4.0 | 2008.12
4 Operation of IP Matrix using the IntuiKey
4.1 Connecting
If the IntuiKey keyboard is connected via the serial interface to a BVIP decoder with activated
IP Matrix, you can control the matrix system with the IntuiKey.
1. Switch on the power supply for the IntuiKey.
2. Press the Prod key and select the Terminal option on the left. IP Matrix is displayed in
the status display.
3. If access to IP Matrix is password protected, you must now enter the password that you
defined on the IP Matrix > General configuration page for the connected BVIP decoder.
4.2 Function Keys
The IntuiKey features the following function keys, which perform the predefined functions
specified below:
Key Function
Prod Starts the search for products that are compatible with the
IntuiKey. Press this key if the connection to IP Matrix is
interrupted. Then press the Terminal softkey to return to the
main menu.
Mon Press this key to select a monitor.
Clr Press this key to delete your last entry with the numeric keys.
After switching on the keyboard, you can press this key to
shorten the boot routine.
Alarm This key lights up red if alarms are currently being issued from
the cameras. By pressing repeatedly, you can acknowledge
several alarms one after the other. Depending on how IP Matrix
is programmed, further actions are triggered when the alarm
key is pressed.
Shot With active AutoDome: Press this key to select and move to a
previously saved preset position.
Enter Press this key to complete and confirm an entry with the
numeric keys.
i
NOTICE!
Functions that concern a monitor or a camera always act on the active monitor and camera.
Their numbers are displayed in the status display.