24
en
Operation
Operating positions
Figure
B
:
Attention:
Before operating the appliance, attach the
tool / accessory to the correct drive and
in the correct position and place in the
operating position according to this table.
The swivel arm must be engaged in every
operating position.
Note:
The swivel arm features an “Easy Armlift”
function which supports the upwards move-
ment of the swivel arm.
Selecting the operating position:
■
Press the Release button and move
the swivel arm. Support movement with
your hand.
■
Move the swivel arm until it engages in
the required position.
Position
Drive
Tool /
Accessory
Operating
speed
1
7
1-7
1-5
1-3
2
7
*
–
3
6
3-7
3-5
4
9
5-7
7
5-7
* Insert / remove whisk, stirrer or kneading
hook.
Operation
W
Risk of injury!
Do not insert mains plug until all prepa-
rations for working with the appliance are
complete.
W
Attention!
Do not operate the appliance without an
accessory / tool in the operating position.
Do not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwave-safe.
■
Before operating the appliance
and accessories for the first time,
clean thoroughly; see “Cleaning and
servicing”.
Preparation
■
Place the base unit on a smooth, clean
surface.
■
Pull out the cord in one go to the
required length (max. 100 cm) and
slowly release; the cord is locked
(Fig.
C
)
.
■
Reducing the cord length:
Pull gently on the cord and allow it to roll
up to the required length. Then gently
pull the cord again and slowly release;
the cable is locked.
Warning!
Do not twist the cord when inserting it. If
the appliance features an automatic cord
winder, do not insert the cord manually. If
the cord jams, pull out the cord all the way
and then allow it to wind up.
■
Insert the mains plug.
