Bosch MultiTalent 8 MC812 Series, Инструкция по эксплуатации

Страница: 23 / 260

23
en Citrus press
Note: Attach french fries disc or Asian
vegetable disc with the blade facing up.
Discs suitable for other purposes are
available from specialist outlets (see
chapter “Special accessories”).
X Fig.
F
1. Attach the bowl. Observe the
marking ( . ) when doing so. Rotate the
bowl clockwise as far as possible.
2. Place the drive shaft on the drive.
3. Take the disc out of the protective cover.
Place the disc on the disc holder. Turn
the desired slicing / shredding side to
face up. Place the disc on the disc
holder so that the drive couplings on the
holder engage with the disc openings.
The disc must rest on the lateral lugs of
the disc holder.
4. Attach the disc holder to the drive shaft,
rotating it slightly.
5. Attach the lid with the pusher. Observe
the marking ( . ) when doing so.
6. Rotate the lid clockwise as far as
possible.
7. Insert the mains plug. Set the rotary
switch to the desired setting.
8. Add the ingredients for slicing or
shredding and push down with the
pusher, applying light pressure. Cut
beforehand if necessary.
■ After processing, set the rotary switch to
P . Disconnect the mains plug.
■ Clean all parts immediately after use.
Doing so prevents residue from drying
on. X “Cleaning and maintenance” see
page 26
Caution!
Finish processing and empty the bowl
before the processed food reaches the
lower edge of the disc holder.
Note:
Add chocolate before switching on
and cover with the pusher. After switching
on, push down with the pusher.
Citrus press
For squeezing juice out of citrus
fruits, e.g. oranges, grapefruits and lemons.
Caution!
The citrus press must be completely
assembled before use.
X Fig.
G
1. Attach the bowl. Observe the
marking (
.
) when doing so. Rotate the
bowl clockwise as far as possible.
2. Place the drive shaft on the drive.
3. Place the strainer basket on the drive
shaft. Observe the marking ( . ) when
doing so. Turn the strainer basket
clockwise. The lug on the strainer
basket must be fully inserted in the slot
in the bowl handle.
4. Attach and press on the pressing cone.
5.
Insert the mains plug.Set the rotary
switch to the setting min .
6. Press one half of the citrus fruit down on
the pressing cone. The juice will run into
the container.
■ After processing, set the rotary switch to
P . Disconnect the mains plug.
■ Clean all parts immediately after use.
Doing so prevents residue from drying
on. X
“Cleaning and maintenance” see
page 26
Caution!
Check the fill level. Maximum processing
quantity: 1000 ml fruit juice.
Juice centrifuge
For juicing pip fruit (e.g. apples,
pears), soft fruit, pitted stone fruit,
vegetables (e.g. carrots, tomatoes).
X Fig.
H
1. Attach the bowl. Observe the
marking ( . ) when doing so. Rotate the
bowl clockwise as far as possible.
2. Place the drive shaft on the drive.
3. Place the filter basket in the grating
container.
4. Turn anti-clockwise until it locks into
place.