17
en
Additional functions
1.
Keep the steam release button pressed
until no more steam escapes from the
steam outlet.
2.
Open the appliance. Open the pressure
locking handle for this purpose (
M
)
and press the opening button on the
basic appliance.
Note:
If the pressure locking handle cannot
be opened, the appliance is not completely
depressurised. In this case, manually
depress the overpressure protection using
a thin pin until no more steam escapes
from the appliance. Then open the pressure
locking handle (
M
) and press the opening
button on the basic appliance.
Additional functions
The following additional functions are
available for preparation programmes with
and without steam pressure function.
Selecting a pre-configured
preparation time
The pre-configured preparation time of the
level [ medium ] is shown on the control
panel for each preparation programme.
The preparation time can be shortened
[ short ] or lengthened [ long ].
1.
Keep pressing button
E
until the
desired indicator is lit. The display
changes from [ medium ] to [ long ] and
then to [ short ] before returning to
[ medium ].
The corresponding pre-configured values
for the preparation time are shown in the
display.
2.
Press button
G
to start the preparation
programme.
Setting a start time delay
The start time delay can be set for the
selected preparation programme so you
can enjoy a freshly prepared meal at a
specific time.
Note:
The start time delay can only be
set for certain preparation programmes.
The pre-configured start time delay varies
among these preparation programmes.
1.
Select the preparation programme.
2.
Press button
A
. Button
G
flashes.
“00:10” flashes in the display.
Press button
A
repeatedly to increase the
displayed time. A brief press increases the
time by 5 minutes. A slightly longer press
increases the time by 10 minutes. Pressing
and holding button
A
for around 2 seconds
increases the time by 30 minutes.
3.
Press button
G
when the desired start
time delay is displayed.
The desired start time delay is shown in the
display. [ timer ] lights up in the display.
The time until the start counts down. Once
this time has elapsed, the preparation
process starts automatically.
Notes:
■ The start time delay can be switched
off at any time by pressing button
G
.
The preparation programme then starts
immediately.
■ If “00:10” does not flash in the display,
a start time delay cannot be set for the
selected preparation programme.
Содержание MUC68 series
