Bosch MUC6 Series, Инструкция по эксплуатации

Страница: 17 / 134

17
en Preparation
Steam pressure function activated
To be able to select preparation pro-
grammes with the steam pressure function,
the pressure locking handle must first of all
be closed (
N
). For this purpose, rotate the
pressure locking handle as far as possible
in a clockwise direction.
An audible signal is emitted when the
appliance is correctly closed and the
steam pressure function is switched on.
Only then can the respective preparation
programme with the steam pressure
function be selected in function selection
mode. The indicators “low steam pressure”
[ K ] or “high steam pressure” [ L ] light up.
X “Preparation with steam pressure” see
page 16
Steam pressure function deactivated
To be able to select preparation
programmes without the steam pressure
function, the pressure locking handle must
always be opened ( M ). For this purpose,
rotate the pressure locking handle as far as
possible in an anti-clockwise direction.
The desired preparation programmes can
be selected in function selection mode
without the steam pressure function.
X “Preparation without steam pressure”
see page 13
There are 8 pre-configured preparation
programmes which can be used with
the steam pressure function. X
“List of
preparation programmes” see page 26
W
Risk of scalding!
■ Ingredients which are liable to froth up,
e.g. like milk and cream must not be
heated under steam pressure.
■ Do not use the steam pressure function
to soft fry food in oil under pressure.
1. Open the appliance. Open the pressure
locking handle for this purpose ( M )
and press the opening button on the
basic appliance.
2. Fill the pan with the desired ingredients.
The measuring scale on the inside of the
pan can also be used to read the quantity.
Caution!
■ Never heat up the appliance under
steam pressure without having added
water or other liquids beforehand. Add
at least 250 ml of water.
■ Fill the pan with a maximum of 3.3 litres.
Only fill the pan at most half-full when
preparing food that expands during
cooking, e.g. rice or dried vegetables.
3. Close the appliance. Press the lid
down for this purpose until it clicks into
place and close the pressure locking
handle ( N ).
An audible signal sounds. The steam
pressure function is switched on.
4. Press button B to access function
selection mode.
The desired preparation programme is
selected in function selection mode and
all settings of the appliance are made.
Button B and the indicators [ my mode ]
and [ K ] are permanently lit. Button G
flashes. “00:00” is shown in the display.