28
en
Troubleshooting
Problem
Cause
Remedy
Display screen
OPEn
Pressure locking handle
closed (
N
) for a preparation
programme without steam
pressure function.
Open pressure locking handle (
M
)
to deactivate the steam pressure
function.
Display screen
CLOSE
Pressure locking handle
open (
M
) for a preparation
programme with steam pressure
function.
Close the pressure locking handle
(
N
) to activate the steam pressure
function.
Display screen
E1~E6
Fault in the appliance.
Abort the preparation programme.
Disconnect the appliance from the
power supply. Switch the appliance on
again. If the problem persists, contact
customer service.
Display screen
E0
Incorrect pan inserted or pan not
recognised.
Insert the pan properly. If the display
persists for more than 20 seconds,
disconnect the appliance from the
power supply and contact customer
service.
Display screen
E1
The steam pressure function
does not work properly.
Disconnect the appliance from the
power supply and restart. If the
problem persists, contact customer
service.
Display screen
E2, E5, E6 or E7
The appliance has overheated.
Disconnect the appliance from the
power supply and allow to cool down.
Restart the appliance once it has
cooled down.
Short-circuit in the appliance.
Disconnect the appliance from the
power supply and contact customer
service.
Display screen
E3
Mains voltage too high.
Contact electricity provider or grid
operator. Have the power supply
checked by an expert.
Display screen
E4
Mains voltage too low.
Display screen
E8
Communication fault
Restart the appliance once it has
cooled down.
Display screen
E12
When selecting a programme
with a high temperature
(e.g.”deep fry”), unsuitable
ingredients have been added
(e.g. water). The programme is
aborted to prevent overpressure.
Remove the unsuitable ingredients
from the pan. Clean pan and then fill
correctly (e.g. oil for the programme
“фритюр” (deep fry)). Leave the lid
open depending on the programme
selected
X
“List of preparation
programmes” see page 23
.
Restart preparation programme.
If you are unable to solve the problem, always call the hotline!
You will find the telephone numbers at the back of these instructions.
MUC6-8_RU_8001018000.indb 28
07.03.2016 10:38:05