Bosch MIC Series 412TF Скачать руководство пользователя страница 9

Страница: 9 / 70

MIC412TI and MIC412TF Camera | Installation and Operation Manual

AAA

| 9

Bosch Security Systems

Issue 8

MIC 412 Options

Options include the following:-

Wiper

a rubber wiper blade mounted on a spring loaded arm is available

as standard on all MIC412 versions.

Heater

Two (2) 10w heaters can be fitted to MIC412 versions

giving improved low temperature performance down to -30°C.

Sunshield

A two (2) part plastic sunshield to provide additional

protection in sunny climates.

MIC-WKT

Washer bracket, nozzle and washer pump drive card kit.

MIC-ALM

8-input alarm card includes washer pump drive function.

MIC-BP3

Bosch Bi-phase converter card for power supplies without

expansion slots available.

MIC-BP4

Bosch Bi-phase converter card for power supplies with an

expansion slot available.

Features

The MIC412 series cameras have the following features:

•

Brushless Motor Technology for whisper quiet operation.

•

Large protocol selection available for easy integration

•

Canting option to allow bottom of pole vision

•

Choice of 18x or 36x camera modules

•

Wide range of mounting options for varied applications

•

Optically flat viewing window

Unpacking

•

Check the exterior of the packaging for visible damage. If any items
appear to have been damaged in transit please inform the shipping
company.

•

Unpack the power supply unit carefully; although ruggedized this is
electronic equipment & should be handled with care.

•

Do not use if any component appears to be damaged. Please contact
Bosch Security Systems Ltd in the event of damaged goods.

•

The shipping cartoon is the best way to transport the unit, save it & all
other packaging materials for future use. If the unit must be returned, use
the original packing materials.

Packaging Contents

Please check for the following contents

•

MIC412 Installation & Operation manual (this guide)

•

Installation & Configuration CD

•

Quick start reference sheet

•

Nebar Gasket

•

MIC412 Dual Optical/Thermal PTZ Camera

CAUTION

: Ensure canted (45°) MIC412’s are laid on

their side; do not stand upright as they are unstable.

CAUTION:

Take extra care lifting or moving MIC412

units due to their weight.

Содержание MIC Series 412TF







































































Результаты поиска

Содержание MIC Series 412TF

Отзывы:

Похожие инструкции для MIC Series 412TF

Бренды по названию

Популярные бренды

Bosch MIC Series 412TF, Инструкция по установке и эксплуатации

Результаты поиска

Содержание MIC Series 412TF

Отзывы:

Похожие инструкции для MIC Series 412TF

Бренды по названию

Популярные бренды