Bosch MaxxiMUM MUMX50GXCN, Инструкция по эксплуатации, Страница: 23 / 37

23
en
Bowl and tools
Blender
W Risk of injury from sharp blades /
rotating drive!
Never place fingers in the attached blender!
Do not remove / attach the blender until
the drive is at a standstill! Do not switch on
the appliance until the blender has been
screwed in all the way and the tool drive
cover (7) has been attached.
W Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Add a max.
0.75 litres of hot or frothing liquid.
Warning!
Operate the blender in the indicated oper-
ating position only. Operate the assembled
blender only and with the lid attached. Lid
must be locked correctly. Do not operate
blender when empty.
Preparation
Figure
H
:
Warning!
Never assemble the blender without the
seal on the blender holder.
Putting the blender together:
■ Insert blender holder with seal into the
blender jug, ensuring that the line is
under the arrow.
■ Attach blender holder by rotating it as
far as possible to the right.
Working with the blender
Figure
G
:
■ Press release button and move
multi-function arm to position 5 .
■ Cover unused drives with drive
covers.
■ Remove the blender drive cover.
■ Attach blender jug (mark on the handle
on mark on the base unit) and turn all
the way in an anti-clockwise direction.
■ Add ingredients.
Maximum amount of liquid ingredients
= 1.75 litres;
Maximum amount of frothing or hot liquids
= 0.75 litres;
Optimum processing amount of solid ingre-
dients = 100 grams.
■ Attach the cover and turn anti-clockwise
all the way into the blender handle. The
cover must be locked in position.
■ Set the rotary switch to the desired
setting.
Adding more ingredients (Fig.
G
-8):
■ Switch off the appliance with the rotary
switch.
■ Remove the lid and add ingredients.
or
■ remove the funnel and gradually add
solid ingredients through the refill
opening.
or
■ pour liquid ingredients through the
funnel.
Important information
When processing liquids / liquid ingredients,
slowly increase the speed of the appliance
in stages to prevent the food from shooting
out.
After using the appliance
■ Switch off the appliance with the rotary
switch. Wait until the blade has come to
a standstill.
■ Remove mains plug.
■ Rotate the blender in a clockwise direc-
tion and remove.
■ Take the lid off the blender jug. Rotate
the lid in an anti-clockwise direction and
remove.
■ Clean all parts, see “Cleaning and
servicing”.
Tip: It is recommended to clean the blender
immediately after use.
11_MUMX50GXCN_8001018585_02-ohneZubehör.indb 23 14.09.2015 12:37:39