Bosch MaxxiMUM MUMX50GXCN, Инструкция по эксплуатации

Страница: 21 / 37

21
en
Bowl and tools
■ Press release button and move
multi-function arm to position 2 .
■ Check the height of the whisk
and, if required, correct.
■ When the height has been set
correctly, press the release
button and move the multi-func-
tion arm to position 1 .
■ Hold whisk in place and tighten nut
anti-clockwise using enclosed key.
Working with the bowl and
the tools
Figure
E
:
■ Press release button and move
multi-function arm to position 1 .
■ Cover unused drives with drive
covers.
■ Insert the bowl:
– Tilt the bowl forwards and then set it
down.
– Turn anti-clockwise until it locks into
place.
■ Depending on the processing task,
insert the stirrer, whisk or kneading hook
firmly into the drive until it locks into
position.
Note:
If using the kneading hook, first insert
dough deflector, then the kneading hook
(Fig.
E
-4b) .
Note shape and position of the parts.
■ Put the ingredients to be processed into
the bowl.
■ Press release button and move
multi-function arm to position 2 .
■ Attach the cover.
■ Insert the mains plug.
■ Set the rotary switch to the desired
setting.
Our recommendation:
■ Stirrer:
First mix at setting 1-2, then setting 3-7
as required
■ Whisk:
setting 7, mix in at setting 1
■ Kneading hook:
first stir in at setting 1, knead at setting 3
Adding more ingredients
■ Switch off the appliance with the rotary
switch.
■ Attach funnel (Fig.
E
-7) .
■ Top up ingredients through the funnel.
or
■ Remove lid.
■ Press release button and move
multi-function arm to position 1 .
■ Add ingredients.
After using the appliance
■ Switch off the appliance with the rotary
switch.
■ Remove mains plug.
■ Remove lid.
■ Press release button and move
multi-function arm to position 1 .
■ Take the tool out of the drive.
■ Remove the bowl.
■ Clean all parts, see “Cleaning and
servicing”.
Working with SensorControl
Your appliance features automatic
SensorControl.
When you are making whipped cream and
egg whites using the whisk, sensors monitor
the beating process and automatically
switch the appliance off when a defined
consistency is reached. The age, the
temperature and the contents of the cream
affect the time required and the result.
Note: Before using the automatic Sensor-
Control for the first time, the food processor
must have been running for at least two
minutes to ensure that the sensors function
correctly.
Figure
F
:
■ Prepare the appliance as described
above.
■ Insert the whisk into the drive until the
whisk locks into position.
■ Adjust the whisk until it just touches the
bottom of the bowl.
see section “Important information on
using the whisk”.
11_MUMX50GXCN_8001018585_02-ohneZubehör.indb 21 14.09.2015 12:37:39