Bosch LTC 8808/00 Series Скачать руководство пользователя | Manualshive

Страница: 18 / 108

background image

first input bay configuration are looped using video ribbon cables to the next group of input
bays. This sequence continues for each LTC 8902 Series Output Bay in the system.Each LTC
8903 Series Input Bay includes one Data Receiver module (LTC 8918) and a power supply
(LTC 8805).

LTC 8934/00 Video Output Modules

The LTC 8934/00 Video Output modules are installed into LTC 8902 Series Output Bays to
provide video output to monitors and DVR/VCRs. Each output module handles 8 outputs. Up
to 8 modules can be installed in each LTC 8902 Series Output Bay.

LTC 8921/00 Video Input Modules

The LTC 8921/00 Video Input modules are installed into LTC 8903 Series Input Bays to accept
input from cameras and other video sources. Each input modules accepts 32 video inputs. Up
to 16 modules can be installed in each LTC 8903 Series Input Bay.

LTC 8943/95 System Controller PC

(Applicable to redundant system configurations only) The LTC 8943/95 Series System
Controller is an industrial grade PC system supplied in a rack-mountable enclosure and
includes a rack-mounted monitor, a rack-mounted keyboard, Windows operating system and
preloaded configuration software. The LTC 8943/95 PC is supplied only if the system is
purchased in the redundant design configuration. The PC runs the System Supervisor
Software that manages the CPU data mirroring and automatic switchover functions. Since the
PC is intended to configure and monitor the operation of the LTC 8900 system, it is strongly
recommended that it be used solely for this purpose. It should not be used as an operator’s
workstation or for any other purpose which could interfere with its ability to provide
automatic switchover functions.

LTC 8944/93 and LTC 8945/93 LAN Switches

(Applicable to redundant system configurations only)The LTC 8944/93 and LTC 8945/93 units
are 10/100Base-T Ethernet LAN switches that provide a communication link between the LTC
8901 Series main CPU bay and the system’s LTC 8902 Series and LTC 8903 Series matrix
bays. The LTC 8944/93 and LTC 8945/93 switches are factory configured to communicate
directly with the LTC 8943/95 System Controller PC in redundant system configurations.

4.5

4.6

4.7

4.8

18

en | System Components

LTC 8900 Series

2015.01 | 10.6 |

Installation Manual

Bosch Security Systems, Inc.

«
...
16
17
18
19
20
...
»

Содержание LTC 8808/00 Series













































































































Отзывы:

Нет отзывов

Похожие инструкции для LTC 8808/00 Series

Бренд: UE Страницы: 4

Бренд: Echelon Страницы: 40

Бренд: Keithley Страницы: 97

Бренд: Happ Страницы: 52

Бренд: Hansen Страницы: 4

Бренд: Lawler Страницы: 4

Бренд: Campbell Страницы: 8

Бренд: JBM Страницы: 35

Бренд: IAI Страницы: 5

Бренд: ValvTechnologies Страницы: 20

TruPortal TP-ADD-1DIP

Бренд: Interlogix Страницы: 9

Бренд: I-Tork Страницы: 15

Бренд: MGC Страницы: 16

Diaval AF Series

Бренд: Comeval Страницы: 10

SMARTCONNECT SMART/REP

Бренд: Zeta Alarm Systems Страницы: 48

Бренд: M-system Страницы: 7

Бренд: D+H Страницы: 12

Бренд: DUCH Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды