Bosch LTC 8808/00 Series, Инструкция по эксплуатации

Страница: 70 / 126

64 | en LTC 8600 | LTC 8800 Series
Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03
17.4.3 Lock or Unlock Control of a Monitor
• When using IntuiKey keyboards, press [
Device Lockout]
, located on the main
Allegiant menu screen for these options.
• With LTC 8555 Series keyboards, press
[Monitor], [Lock]
, then
[ON]
to lock a mon-
itor or
[OFF]
to unlock the monitor. If the monitor to be unlocked is not the one
currently being controlled by the keyboard, enter the monitor number (but do
not press
[Enter]
) after you press
[Monitor]
.
If the Status option is enabled, the section of the on-screen overlay between the
camera number and the time shows
M
L
indicating the monitor is locked. This status
prevents other operators from changing the video on the monitor being used
(unless they have a higher priority). Remember to unlock the monitor when finished
so other operators can access it. If an operator with a higher priority accesses a
locked monitor and switches to a different camera, the lock is automatically
removed.
17.4.4 Recording a Camera Pre-position Scene
Select a camera with pan/tilt/zoom control and with preposition options. Using the
joystick and lens controls, adjust the camera to view the scene you wish to store.
When using IntuiKey keyboards, press [
Camera Control]
, located on the main Alle-
giant menu screen to enter a menu screen with this option. Press
Set Shot [Set]
, then
select the scene number via the numeric keypad, and press
[Enter]
. The camera
position is stored for recall later.
If an AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
If an Allegiant conventional receiver/driver is being controlled, the pan/tilt and
zoom lens must have the necessary options for pre-position operation. On certain
models of AutoDomes and Allegiant Receiver/Driver Series, it is possible to disable
a previously stored pre-position, or remove it from a pre-position tour, by pressing
Set Shot [Set]
, the digit
9
, followed by the 2-digit pre-position number. Refer to infor-
mation supplied with the device to determine if it supports this feature.
NOTE
Alarm activations are defaulted to call preposition scene 16.
17.4.5 Recalling a Camera Pre-position Scene
Select the camera to be activated. Press [
Shot]
, enter a previously stored camera
position number via the numeric keypad, then press
[Enter]
. The camera automati-
cally returns to the previously stored position. If a second pre-position is called
prior to the completion of the first, the camera will move directly to the second
shot.
If the AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
17.4.6 Activate/Deactivate Auxiliary Function
When using IntuiKey keyboards, press [
Camera Control]
, on the main Allegiant menu
screen to enter a menu containing these options. To turn on an auxiliary function of
a remote camera device, press
Aux ON [ON]
, enter the number of the auxiliary you
would like to activate and then press
[Enter]
. Holding the
[Enter]
key down causes the
auxiliary function to be sent repeatedly. This capability is useful when the auxiliary
is activating a housing window washer function, or a temporary light source.
To turn
OFF
an auxiliary function of a remote camera device, press
Aux OFF [OFF]
,
enter the number of the auxiliary you would like to deactivate and then press
[Enter]
.