Bosch KGN36HI32, Руководство пользователя

Страница: 42 / 140

en
Home Connect
42
7.
After successfully connecting, open
the Home Connect app on the
mobile device.
The app will search for the
refrigerator.
8.
As soon as the refrigerator has been
found, enter the network name
("SSID") and the password ("Key") of
your own home network (WLAN) into
the corresponding fields.
9.
Confirm with the button
Transmit to
domestic appliances
.
–
If the connection is successful,
the freezer compartment
temperature display shows
On
and the energy saving mode
display lights up.
You can now connect the
refrigerator with the app.
–
If the freezer compartment
temperature display shows
OF
,
no connection could be
established.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process.
Connecting the refrigerator with the
app
1.
Press the
alarm off
button.
The refrigerator compartment
temperature display shows
Cn
.
2.
Press button
+
refrigerator
compartment until the refrigerator
compartment temperature display
shows
PA
and the freezer
compartment temperature display
shows
OF
.
3.
Press the button
+
freezer
compartment to connect the
appliance with the app.
The freezer compartment
temperature display shows an
animation and the energy saving
mode display lights up.
4.
Wait until the refrigerator is displayed
in the Home Connect app on the
mobile device.
If the refrigerator is not automatically
displayed, first select
Search for
domestic appliances
and then
Connect domestic appliance
in the
Home Connect app.
5.
Follow the instructions in the app
until the process is complete.
Refrigerator compartment
temperature display shows
Pa
and
freezer compartment temperature
display shows
On
.
The refrigerator is successfully
connected with the app.
If the connection fails, check whether
the mobile device is connected to
the home network (WLAN).
Then try to establish the connection
again.
If
Er
appears in the freezer
compartment temperature display,
reset the Home Connectsettings.
Note:
When resetting, all the Home
Connect settings are reset.
Verify signal strength
You should verify the signal strength if
no connection can be established.
1.
Press the
alarm off
button.
The refrigerator compartment
temperature display shows
Cn
.
2.
Press button
+
refrigerator
compartment until the refrigerator
compartment temperature display
shows
SI
. In the freezer
compartment temperature display, a
value appears between 0 (no signal)
and 3 (full signal).
The signal strength should be at
least 2. If the signal strength is too
weak, the connection may be
interrupted.
–
Place the router and refrigerator
closer together.
–
Ensure that the connection is not
interfered with by screening walls.
–
Install a repeater to make the
signal stronger.