Bosch KGN36HI32, Руководство пользователя

Страница: 35 / 140

Installation and connection
en
35
--------
Before using your appliance
for the first time
1.
Remove leaflets, adhesive tape and
protective film.
2.
Clean the appliance.
~
"Cleaning" on page 49
Electrical connection
Caution!
Do not connect the appliance to
electronic energy saver plugs.
Note:
You can connect the appliance
to mains-controlled and sine-controlled
inverters.
Mains-controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications. Isolated
applications, e.g. on ships or in
mountain lodges, which are not
connected directly to the national grid.
1.
After installing the appliance, wait at
least 1 hour before connecting it to
prevent damaging the compressor.
2.
Connect the appliance via a
correctly installed socket.
The socket must comply with the
following data:
Outside Europe: Check whether the
indicated current type of the
appliance corresponds with the
values of your power supply.
Appliance specifications are on the
rating plate.
~
"Getting to know your appliance"
on page 36
3.
Connect the appliance to a socket
near the appliance.
The socket must be freely
accessible even after the appliance
has been installed.
Vacuum the back of the appliance once a year. The air on the rear panel of the appliance does not
warm up so intensely. The appliance consumes less
power if the warm air can escape.
Do not cover or block the ventilation openings.
Using the appliance
Socket with 220 V ... 240 V
Conductor 50 Hz
Fuse 10 A ... 16 A