Bosch HSN892LEU, Руководство по эксплуатации

Страница: 10 / 29

18 19
Cooking
Please observe the following information to ensure the
long-lasting attractiveness of your hob and avoid damage:
❑
Saucepans and frying pans should not have a rough
base otherwise they will scratch the hob surface.
❑
Do not prepare food in aluminium foil or plastic
containers. These materials will melt.
❑
The base of the saucepan or frying pan must be clean
and dry before it is placed onto the hotplate.
❑
Do not allow enamel pans to boil dry as this could
damage the base of the pan and the ceramic surface.
❑
If you are using special cookware, observe the
manufacturer's instructions.
❑
Do not use the hob as a storage or work surface.
Grains of salt, sugar or sand (which are sometimes left
when vegetables are cleaned) can cause scratches on
the hob.
❑
Ensure that no hard or sharp object is dropped onto
the hob, otherwise it could be damaged as a result.
❑
If any food is spilt or boils over, remove it while still hot
using the glass scraper.
❑
Important: Melted sugar or food with a high sugar
content that has boiled over must be removed from the
hot cooking zone immediately by means of the glass
scraper.
❑
Do not use a protective foil on the hob.
❑
Do not place hot saucepans or frying pans on the hob
frame.
Cooking
How to avoid damage
to your hob:
Cookware
Cooking surface
Hob frame
The alarm
The alarm (timer) works independently of the other
settings. The alarm can be set even if another process is
being implemented via the clock.
1.
Press the timer button
8
.
Start step 2 within the next six seconds.
2.
Set the duration using the plus or minus button.
The time will reappear after six seconds.
The bellsymbol
8
appears.
After the time has elapsed, an acoustic signal will sound
for approx. 7 minutes. This can be cancelled using the
timer button
8
.
Correction:
Press the timer button
8
and enter the correct duration
using the plus or minus button.
Cancelling:
Press the timer button
8
and set the duration to 0.00
using the minus button.
❑
If you want to find out how much time is remaining,
press the timer button
8
. The remaining time will
appear in the display for three seconds.
❑
You may set a duration up to a maximum of 23 hours
and 59 minutes.
❑
You may change the sound signal of the clock. Press
the minus button without having previously selected
any other function, the signal change. A selection from
3 possible signals can be made. The selected signal is
audible as long as the minus button is pressed. If you
want to change the selected sound signal, press the
minus button again.
The alarm
Setting procedure:
Timer button Minus button Plus button
+ -
A
U
T
O
Note: