Trouble shooting
en
21
4.
Lift the panel up and pull it out (fig. C).
Clean the panels with glass cleaner and a soft cloth.
:
Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Installation
During installation, make sure that the lettering "top
right" is upside down at the bottom left.
1.
Insert the panel at an angle towards the back
(fig. A).
2.
Insert the top panel at an angle towards the back
into the brackets. The smooth surface must face
outwards. (fig. B).
3.
Put the cover back in
place and press on it.
4.
Attach the oven door.
Do not use the oven again until the panels have been
correctly installed.
Additional door safety
When preparing meals with long cooking times, the
oven door can reach very high temperatures.
Supervise small children and keep them away from the
oven when the oven is in operation.
Additional safety devices have been fitted to prevent
contact with the oven door. Always attach these safety
devices when children could come near the oven.
You can purchase this optional accessory (11023590)
from the after-sales service.
3
Trouble shooting
Trouble shooting
If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Malfunction table
If your meal is not successful, please refer to section
.
We have tested the recipe for you in our cooking studio
. Here,
you will find useful cooking tips and tricks for cooking,
baking and roasting.
:
Warning – Risk of electric shock!
Repairs that are not carried out properly are dangerous.
Repairs must only be performed by one of our after-
sales service technicians.
&
%
$
Malfunction
Possible cause Remedy/information
The oven does
not work.
The circuit
breaker is defec-
tive.
Look in the fuse box to see if
the circuit breaker is defective.
Power cut.
Check whether the kitchen light
and other kitchen appliances
are working.
Oven not hot.
Dust on the con-
tacts.
Turn the control knobs several
times to the left and right.