en
Getting to know your appliance
10
Keep the original appliance packaging. Only transport
the appliance in the original packaging. Observe the
transport arrows on the packaging.
If the original packaging is no longer available
pack the appliance in protective packaging to
guarantee sufficient protection against any transport
damage.
Transport the appliance in an upright position. Do not
hold the appliance by the door handle or the
connections on the rear, as these could be damaged.
Do not place any heavy objects on the appliance.
*
Getting to know your
appliance
Getting to know your appliance
In this section, we will explain the indicators and
controls. You will also find out about the various
functions of your appliance.
Note:
Depending on the appliance model, individual
details and colours may differ.
General information
The design depends on the respective appliance
model.
Cooking area
Here is an overview of the control panel. The design
depends on the respective appliance model.
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
It shows which hotplates are still hot. Even if the hob is
switched off, the display remains lit until the hotplate
has cooled down sufficiently.
You can save energy by using the residual heat to keep
a small dish warm, for example.
Explanations
1
Hob**
2
Control panel**
3*
Cooling fan
4
Oven door**
5*
Plinth drawer**
*
Optional (available for some appliances)
**
Details may vary depending on the appliance
model.
Explanations
1
Hotplate 18 cm
2
Hotplate 14.5 cm
3
Hotplate 14.5 cm
4
Hotplate 21 cm
5
Residual heat indicator