en
Before using for the first time
16
5.
Check through the hole in the oven's bottom panel
that the flame is burning. If the flame is not burning,
repeat the process from step 3.
6.
Close the oven door carefully.
7.
Switch off the function selector for the lower gas
burner after 30 minutes.
Setting the gas grill
1.
Open the top cover. The top cover must remain
open for as long as the cooker is in operation.
2.
Turn on the main gas supply to the appliance. Insert
the plug into the socket.
3.
Insert the protecting plate into the groove below the
control panel.
Insert the protecting plate with the longer edge at the
front and the curvature at the bottom.
Secure the protecting plate in the groove below the
control panel using the retainers.
Ensure that the protecting plate is engaged in the
retainers. If the protecting plate cannot be removed,
it is properly engaged. You can now safely use the
protecting plate. If it can be removed, insert it into
the groove at a slightly higher angle and make sure
that it engages in the retainers.
4.
Close the oven door so that it is as close as possible
to the protecting place.
5.
Push in the function selector and turn it clockwise to
the ignition position
8
.
6.
Keep the function selector pressed in and turn it to
the grill setting
(
.
Keep the function selector pushed in for 10 seconds
so that the safety pilot starts up. The gas coming
from the gas grill is ignited.
7.
Check whether the flame continues to light up. If the
flame goes out, repeat the process from step 5.
8.
Switch off the function selector after 30 minutes.
Once the oven has cooled down, remove the
protecting plate.
Caution!
The gas grill only works when the protecting plate is
inserted.
Make sure that the protecting plate is correctly inserted.
Cleaning the accessories
Before you use the accessories for the first time, clean
them thoroughly with hot soapy water and a soft dish
cloth.
