18
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
No other time function can be programmed.
1.
Press the
0
button for approximately 4 seconds.
The display panel will show the current basic setting for the
time, e.g.
™‚
for the Selection
‚
.
2.
Set the basic setting using the buttons
@
or
A
.
3.
Confirm with the
0
button.
The display panel shows the following basic setting. Using
the button
0
select the levels and using the buttons
@
or
A
make the setting.
4.
Press the
0
button for approximately 4 seconds.
All basic settings have been applied.
The basic settings can be changed again at any time.
Care and cleaning
With attentive care and cleaning, your hob and oven will retain
its looks and remain in good working order for a long time. We
will explain here how you should care for and clean them
correctly.
Notes
■
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect operation. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
■
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or stain
remover,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
■
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
Basic settings
Selection
‚
Selection
ƒ
Selection
„
™‚
Time indicator
always*
only with
the
button
0
-
™ƒ
Duration of signal
after the cooking
time or the time set
on the timer has
elapsed
approx.
10 sec
approx.
2 min.*
approx.
5 min
™„
Time until a setting is
applied
approx.
2 sec
approx.
5 sec.*
approx.
10 sec.
* Default setting
Zone
Cleaning agent
Stainless steel sur-
faces*
(depending on
appliance model)
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. On stainless steel surfaces,
always wipe parallel to the natural grain.
Otherwise, you may scratch the surface.
Remove patches and splashes of limes-
cale, grease, starch and albumin (e.g.
egg white) immediately. Corrosion can
form under such patches and splashes.
Special care products suitable for hot
stainless steel surfaces are available
from our after-sales service and from
specialist retailers. Apply a thin layer of
care product with a soft cloth.
Enamel, painted,
plastic and screen-
printed surfaces*
(depending on
appliance model)
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
Control panel
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
Upper glass cover*
(depending on
appliance model)
Glass cleaner:
Clean with a soft cloth.
You can remove the upper glass cover
for cleaning. To find out how to do this,
please refer to the section
Upper glass
cover
.
Rotary knobs
Do not remove.
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth.
Hob surround
Hot soapy water:
Do not clean with a glass scraper, lemon
juice or vinegar.
* Optional (available for some appliances, depending on the
appliance model)
Содержание HGD745356Z
Страница 1: ... en Instruction manual Free standing cooker HGD745356Z ...
Страница 2: ......
