Appliance door
en
19
q
Appliance door
Appliance door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Locking the appliance door
1.
Open the appliance door fully.
2.
Open the two locking levers on the left and right
(fig.
!
).
3.
Close the appliance door as far as it goes (fig.
"
).
Removing panels
1.
Press the left- and right-hand sides of the cover
(fig.
!
).
2.
Remove the cover (fig.
"
).
3.
Lift out each panel (fig.
#
) and set them down
carefully on a flat surface.
4.
If necessary, you can remove the condensate trough
for cleaning. To do this, open the appliance door
fully (fig.
$
).
5.
Tilt the condensate trough up and remove it (fig.
%
).
Clean the panels with glass cleaner and a soft cloth.
Wipe the condensate trough with a cloth and some hot
soapy water.
:
Warning
Risk of injury!
■
Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
Risk of injury!
■
The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting panels
1.
Open the appliance door fully and refit the
condensate trough. To do this, insert the trough from
above and rotate it at the bottom (fig.
!
).
2.
Close the appliance door fully.
3.
Slide each panel back in and make sure that it is
sitting correctly at the bottom in the retainer (fig.
"
).
2
1
2
1
1
2
Содержание HEA537B.0
Страница 1: ... en Instruction manual Built in cooker HEA537B 0 ...
Страница 2: ......