Bosch HCB738257I, Инструкция по эксплуатации

Страница: 16 / 52

en
Time-setting options
16
Removing the rotary spit
:
Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
1.
Opening the appliance door
2.
Slowly pull the universal pan until it is halfway out of
the cooking compartment.
3.
Completely remove the universal pan from the
cooking compartment and set it on the worktop.
4.
Screw on the handle and remove the grill spit from
the grill spit frame.
O
Time-setting options
Time-sett ing optio ns
Setting the time
After the appliance has been connected to the mains
for the first time or after a power cut, three zeros flash in
the display.
1.
Press the
0
button.
2.
Set the current time with the "+" and "-" buttons.
After 7 seconds, the time setting is adopted.
Note:
To change the set time, press the "+" and "-"
buttons and set the current time with the "+" and "-"
buttons.
Setting the timer
The timer has no influence on the functions of the oven.
The duration of the timer can be set to between 1
minute and 23 hours and 59 minutes.
1.
Press the "
0
" button.
The
V
symbol flashes in the display panel and three
zeros are displayed.
2.
Set the required cooking time with the "+" and "-"
buttons.
A signal sounds once the time has elapsed.
Notes
■
To change the set cooking time, select the timer with
the
0
button and set the cooking time using the "+"
and "-" buttons.
■
To cancel the settings, select the timer with the
0
button and press the "+" and "-" buttons
simultaneously.
Switching off the acoustic signal
Press the "-" button to switch off the acoustic signal.
After seven minutes, the signal switches off
automatically.
Changing the audible signal
Three different audible signals are available.
1.
Press the "+" and "-" buttons simultaneously.
2.
Press the
0
button.
The current audible signal is shown in the display
panel, e.g. "Tone 1".
3.
Press the "-" button to select a different audible
signal.