Bosch GWH-635-ES, Руководство пользователя

Страница: 4 / 12

4
Using the Remote Control
6 720 606 990
4.2 Remote control trans-
ceiver PCB installation
Pre-installation preparation
B
Remove the plug from the supply
socket.
B
Remove plastic decals on front
panel.
B
Undo two Philips head screws
located behind decals.
B
Lift front cover panel upward and
remove.
B
Remove the lower cover from the
control box.
B
Remove the 2 sets of cables from
the control box PCB.
B
Undo connections from both ignition
cables.
B
Remove holding bracket.
B
Remove control box.
Control box is now out of the appliance
casing.
Remote control transceiver PCB
installation
B
Open control box top cover (Fig. 3,
pos. 1).
B
Remove the protective cover (Fig. 3,
pos. 2) from one face of the support
and fix it to the main PCB as shown
in Fig. 3.
Fig. 3
B
Remove the other protective cover
and fix the remote control PCB as
shown in Fig. 4.
Assure that the face of the remote
control PCB is against the control box.
Warning: For
safety reasons,
disconnect the
power supply to the
heater.