Bosch GWH-635-ES, Руководство пользователя

Страница: 8 / 12

8
Using the Remote Control
6 720 606 990
4.6 "Priority" function
The equipment does not have a default
temperature setting and therefore has
no default "Priority" function.The
"priority"
will be attributed
automatically by the first user who
selects or memorises (on the remote
control or on the control panel) a
temperature for subsequent use (e.g. a
shower).
Then, when the hot water is used (e.g.
for a shower), the control panel display
and remote control/s display will show
the symbol "
".
The temperature may only be modified
using
the same buttons that
memorized it (depending on whether
the control panel or the remote control
was used).
The "Priority" function ends:
• 5 m inutes after the last use of the
hot water (return to basic set up).
• 2 minutes after selecting/
memorizing the temperature if no hot
water
is used immediately
afterwards.
Acquiring "priority”
Any user can acquire "priority" for
subsequent use of hot water, as
follows:
B
Move main switch to position I.
B
Keep button or button
pressed.
B
Select the required temperature.
B
Press the "Program" button for 3
seconds
to memorize the
temperature, if required.
B
Use the hot water within two
minutes of acquiring "priority.
4.7 Error Messages
This device has an error message
system.
Any anomalies will be
i
Temperature cannot be
memorized or selected
using the control panel
buttons
or even a
second remote control
when hot water is in use
(e.g. during a shower)
since
the "Priority"
function will
automatically start up to
stop
another user
modifying the
temperature when hot
water is in use.
i
"Priority" cannot be
acquired whilst the hot
water tap is open.