Bosch GWH-635-ES, Руководство пользователя

Страница: 9 / 12

9
Maintenance
6 720 606 990
indicated by an error code that will
appear on the display (Fig. 2, pos. 1)
and by a symbol indicating a "safety
block" (Fig. 2, pos. 7). The device will
be operative once again following the
elimination of the fault and after
pressing the reset button.
To identify the type of anomaly, consult
chapter 5 of the installation manual.
5 Maintenance
5.1 Replacing batteries
When batteries are flat, the sym bol
(Fig. 2, pos. 5) will appear on the
display.
B
Remove the two screws on the back
of the remote control.
B
Open the battery housing and
remove the flat batteries, then
replace with new batteries, ensuring
they are inserted correctly.
B
Close the battery housing using the
two screws.
5.2 Cleaning
Use a damp cloth to clean parts of the
remote control. No abrasive or solvent-
based detergents are needed.
i
Certify that the rubber
seal is correctly fitted
between both plastic
housing parts.
Warning:
flat bat-
teries must be
replaced.
Consequently,
the
manufacturer is not
liable for any faults or
damage caused by
flat batteries.
Do not create litter
with flat batteries:
ensure
they are
disposed of in the
specific refuse con-
tainers.