22
| English
1 609 929 N93 | (2.9.08)
Bosch Power Tools
35
Extraction adapter for parallel guide*
36
Router compass/guide-rail adapter*
37
Router compass handle*
38
Wing bolt for coarse adjustment of
router compass (2x)*
39
Wing bolt for fine adjustment of
router compass (1x)*
40
Fine-adjustment knob for router compass*
41
Centring screw*
42
Base spacer
(included in the “router compass” set)*
43
Guide rail*
44
Guide bushing adapter
45
Fastening screw for guide bushing adapter
(2x)
46
Release lever for guide bushing adapter
47
Guide bushing
48
Pan head screw for guide plate
49
Countersunk head screw for guide plate
50
Centring pin
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745 (chip board).
Typically the A-weighted noise levels of the
product are: Sound pressure level 89 dB(A);
Sound power level 100 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
=5.5 m/s
2
, Uncer-
tainty K =2.5 m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
Plunge router
GOF 900 CE
Professional
GOF 1300 CE
Professional
Article number
0 601 614 6..
0 601 613 6..
Rated power input
W
900
1300
No-load speed
min
-1
12000 – 24000
12000 – 24000
Speed preselection
z
z
Constant electronic control
z
z
Connection for dust extraction
z
z
Tool holder
mm
inch
6 – 8
¼
6 – 12.7
¼ – ½
Plunge depth
mm
50
58
Weight according to EPTA-Procedure 01/2003
kg
3.5
4.8
Protection class
/
II
/
II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
OBJ_BUCH-203-003.book Page 22 Tuesday, September 2, 2008 8:46 AM
