English |
27
Bosch Power Tools
2 610 956 206 | (15.1.08)
– Push the release lever
16
down and slowly
lower the plunge router until the adjusted
depth-of-cut is reached. Let go of the release
lever
16
again to lock this cutting depth.
– Guide the switched on power tool with the
protruding guide bushing alongside the tem-
plate applying lateral pressure.
Operation with Router Table (Accessory)
f
The GOF 2000 CE is compatible with several
router tables available on the accessories
market. To ensure safe mounting and usage
as intended for the GOF 2000 CE with a rout-
er table, it is absolutely necessary that you:
– make sure that the selected router table
is compatible with the GOF 2000 CE
(please observe the information of the
router table manufacturer)
– follow the mounting and operating in-
structions of the router table manufactur-
er
– follow the safety warnings of the router
table manufacturer and all safety warn-
ings of the GOF 2000 CE in these operat-
ing instructions.
Bosch shall not assume any liability whatso-
ever for injuries and damage that can occur
caused by use of the GOF 2000 CE with a
router table other than intended for.
Maintenance and Service
Maintenance and Cleaning
f
Before any work on the machine itself, pull
the mains plug.
f
For safe and proper working, always keep
the machine and ventilation slots clean.
f
In extreme working conditions, conductive
dust can accumulate in the interior of the
machine when working with metal. The pro-
tective insulation of the machine can be de-
graded. The use of a stationary extraction
system is recommended in such cases as
well as frequently blowing out the ventila-
tion slots and installing a residual current
device (RCD).
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
Do
not
connect the blue or brown wire to the
earth terminal of the plug.
Important:
If for any reason the moulded plug is
removed from the cable of this power tool, it
must be disposed of safely.
After-sales Service and Customer As-
sistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: [email protected]
OBJ_BUCH-622-001.book Page 27 Tuesday, January 15, 2008 5:10 PM
