English |
21
Bosch Power Tools
2 610 956 206 | (15.1.08)
17
Thumbwheel for speed preselection
18
Lock-on button for On/Off switch
19
On/Off switch
20
Lock for release lever
21
Open-end spanner, size 24 mm*
22
Router bit*
23
Extraction hose (
Ø 35 mm)*
24
Extraction adapter*
25
Wing bolt for extraction adapter (2x)*
26
Parallel guide*
27
Guide rod for parallel guide (2x)*
28
Wing bolt for fine adjustment of parallel
guide (2x)*
29
Wing bolt for coarse adjustment of
parallel guide (2x)*
30
Fine-adjustment knob for parallel guide*
31
Edge guide for parallel guide*
32
Extraction adapter for parallel guide
33
Router compass/guide-rail adapter*
34
Router compass handle*
35
Wing bolt for coarse adjustment of
router compass (2x)*
36
Wing bolt for fine adjustment of
router compass (1x)*
37
Fine-adjustment knob for router compass*
38
Centring screw*
39
Base spacer
(included in the “router compass” set)*
40
Guide rail*
41
Guide bushing adapter
42
Fastening screw for guide bushing adapter
(2x)
43
Release lever for guide bushing adapter
44
Guide bushing*
45
Fastening screw for guide plate (4x)
46
Centring pin*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 89 dB(A);
Sound power level 100 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
=5.0 m/s
2
, Uncer-
tainty K =1.5 m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
Plunge router
GOF 2000 CE
Professional
Article number
3 601 F49 ...
Rated power input
W
2000
No-load speed
rpm
8000
– 21000
Speed preselection
z
Constant electronic
control
z
Connection for dust ex-
traction
z
Tool holder
mm
inch
8
– 12.7
¼ – ½
Plunge depth
mm
65
Weight according to
EPTA-Procedure 01/2003
kg
6.0
Protection class
/
II
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-622-001.book Page 21 Tuesday, January 15, 2008 5:10 PM
