English |
33
Bosch Power Tools
1 609 92A 3UL | (10.1.18)
38
Locking screw of the adjustable fence
39
Hex key (6 mm/4 mm)
40
Material clamp
41
Adjusting screw of depth stop
42
Depth stop
43
Spindle lock
44
Left bevel angle indicator
45
Stop for 0° standard bevel angle
46
Chip deflector
47
Hex socket screw for mounting of saw blade
48
Clamping flange
49
Saw blade
50
Interior clamping flange
51
Threaded rod
52
Wing bolt
53
Exit opening for laser beam
54
Screws for insert plate
55
Material stop
56
Lock screw of the material stop
57
Clamping screw of the material stop
58
Adjustment screw for laser position (flush levelling)
59
Hex key (2,5 mm)
60
Screws for laser protection cap
61
Fastening screw for laser mounting plate
62
Fastening screw for laser housing
63
Stop screw for 0° bevel angle
64
Stop screw for left-hand bevel angle range
65
Stop screw for right-hand bevel angle range
66
Set screws of scale
28
for mitre angles
67
Screw for mitre angle indicator
68
Velcro strap
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 62841-3-9.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92 dB(A); Sound power level
105 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
The noise emission value given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It may also
be used for a preliminary estimation of noise emissions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used for
other applications, with different accessories or is poorly
maintained, the noise emission value may differ. This may sig-
nificantly increase noise emissions over the total working pe-
riod.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually being
used, should also be taken into account. This may significant-
ly reduce noise emissions over the total working period.
Sliding Mitre Saw
GCM 12 SDE
Article number
3 601 M23 1..
3 601 M23 14.
3 601 M23 1B.
3 601 M23 16.
Rated power input
W
1800
1800
1450
No-load speed
min
-1
3300–4300
3300–4300
4000
Reduced starting current
–
Laser type
nm
mW
650
< 1
650
< 1
650
< 1
Laser class
1
1
1
Divergence of laser line
mrad (full angle)
1.0
1.0
1.0
Weight according to EPTA-
Procedure 01:2014
kg
28.4
28.4
28.4
Protection class
/
II
/
II
/
II
Dimension of suitable saw blades
Saw blade diameter
mm
305
305
305
Blade body thickness
mm
1.7–2.6
1.7–2.6
1.7–2.6
Max. cutting width
mm
3.0
3.0
3.0
Mounting hole diameter
mm
30
25.4
30
Permissible workpiece dimensions (maximum/minimum) see page 37.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
160992A3UL_201801.book Page 33 Wednesday, January 10, 2018 1:52 PM
