Bosch FLEXIDOME multi 7000i, Руководство пользователя

Страница: 27 / 56

FLEXIDOME multi 7000i | FLEXIDOME multi 7000i
IR
Configuration | en 27
Bosch Security Systems B.V.
User manual
2021-04 | 01 |
4.4.5 Color
The color can be selected for each of the four video channels. Each video channel corresponds
to one of the four imagers in the camera.
Brightness (0...255)
Adjust the brightness with the slider from 0 to 255.
Contrast (0...255)
Adjust the contrast with the slider from 0 to 255.
Saturation (0...255)
Adjust the color saturation with the slider from 0 to 255.
White balance
Select the appropriate white balance mode from the drop-down list.
–
Basic auto mode allows the device to continually adjust for optimal color reproduction
using an average reflectance method. This is useful indoor light sources and for colored
LED light illumination.
– Standard auto mode allows the device to continually adjust for optimal color
reproduction in an environment with natural light sources.
– Sodium lamp auto mode allows the device to continually adjust for optimal color
reproduction in an environment with sodium vapor light sources (street lighting).
– In Manual RGB mode the Red, Green, and Blue gain can be manually set to a desired
position.
Apply white balance
Click Hold to put ATW on hold and save the current color settings. The mode changes to
manual.
The table below identifies the options available in the field
White balance and the additional
fields that appear depending on the options selected.
Option in field “White
balance”
Additional fields for
configuration
NOTES
Basic auto The three fields R-gain , G-gain , and B-
gain only appear when the hold button
is pushed.
Standard auto
Sodium lamp auto
Manual RGB R-gain
G-gain
B-gain
4.4.6 ALC (Automatic Level Control)
ALC (Automatic Level Control) can be selected for each of the four video channels. Each video
channel corresponds to one of the four imagers in the camera.
ALC mode
Select the appropriate automatic high-level control mode from the drop-down list.
–
Fluorescent 50 Hz
– Fluorescent 60 Hz
– Standard
ALC level
Adjust the video output level (-15 to 0 to +15).
Select the range within which the ALC will operate. A positive value is more useful for low-
light conditions; a negative value is more useful for very bright conditions.