Bosch FLEXIDOME multi 7000i, Руководство пользователя

Страница: 34 / 56

34 en | Configuration
FLEXIDOME multi 7000i | FLEXIDOME multi 7000i
IR
2021-04 | 01 |
User manual
Bosch Security Systems B.V.
2. Click Edit below the list.
3. Click Wipe in the new window to wipe the recordings in the storage medium.
4. Click Close to close the window.
Click Set to apply the changes.
4.5.2 Recording Profiles
A recording profile contains the characteristics of the tracks that are used for recording. These
characteristics can be defined for ten different profiles. The profiles can then be assigned to
days or times of day on the
Recording Scheduler page.
Each profile is color-coded. The names of the profiles can be changed on the Recording
Scheduler page.
To configure a profile click its tab to open its settings page:
–
To copy the currently visible settings to other profiles, click Copy Settings . A window
opens to select the target profiles for the copied settings.
– If you change a profile’s settings, click Set to save.
– If necessary, click Default to return all settings to their factory defaults.
Stream profile settings
Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This
selection is independent of the selection for live stream transmission. (The properties of the
encoder profiles are defined on the
Encoder Profile page.)
Select the stream2 pre-position scene that is to be used for recording. (The stream2 pre-
positions for stream 2 are configured on the
Live page.)
Settings for selected recordings
The Recording Profiles can be selected for each of the four video channels. For each video
channel, recording 1 and recording 2 can be defined. Click the recording profile that you want
to set.
Recording includes
Select what is to be included in the recordings:
–
Audio : If audio is not enabled, Off is shown. Click on Off and the page is redirected to
the Audio section.
– Metadata .
You can specify whether, in addition to video data, audio data and metadata (for example
alarms, VCA data and serial data) should also be recorded. Including metadata could make
subsequent searches of recordings easier but it requires additional storage capacity.
!
Caution!
Without metadata, it is not possible to include video content analytics in recordings.
Select the mode for standard recordings:
–
Continuous : the recording proceeds continuously. If the maximum recording capacity is
reached, older recordings are overwritten automatically.
– Pre-alarm : recording takes place in the pre-alarm time, during the alarm and during the
post-alarm time only.
– Off : no automatic recording takes place.
Stream
Select the stream to be used for standard recordings:
–
Stream 1
– Stream 2