Ambient operating range
when powered by 24 VAC
-50 °C to 60 °C
(-58 °F to 140 °F)
-50 °C to 55 °C
(-58 °F to 131 °F)
Ambient operating range when powered by
HPoE
-40 °C to 60 °C
(-40 °F to 140 °F)
-40 °C to 55 °C
(-40 °F to 131 °F)
–
If starting up the unit below -40 °C, there may be a delay (up to 30 minutes) between
when power is applied to the camera and when video output is available.
–
The joint between the junction box and housing is secured by a thread locker for
permanent securement. This joint shall not be removed because there may be damage to
the flame path threads.
–
The device was subjected to the resistance to impact test at 2 J. It shall be installed
where it will not be subjected to impact.
–
For ambient temperatures below –10 °C, use field wiring suitable for the minimum
ambient temperature.
Note: For instructions to configure the camera, refer to the Software Manual. Go to http://
www.boschsecurity.com, navigate to the product page for your camera, and then locate the
document in the Documents tab.
Note: This product is serialized to ensure traceability.
Technical information for thread adapter
–
Manufacturer – Hazardous Location Solutions, LLC
–
Aluminum model number supplied with Aluminum housing EXTEGRA Camera: R1.3/4.20.N
–
Stainless Steel model number supplied with Stainless Steel housing EXTEGRA Camera:
R1.3/4.20.S
–
Thread adapters are certified under certificates: SIRA 07ATEX1175X and IECEx SIR
07.0046X
–
Flameproof joint information between the adapter and EXTEGRA Camera housing when
installed: minimum 5 full threads engaged
18
en | Installation Overview
EXTEGRA IP 9000 FX
2016.02 | 1.2 | F.01U.319.357
Installation Manual / Guide d'installation
Bosch Security Systems
