Bosch DVR-451-04A050, Инструкция по установке и эксплуатации

Страница: 39 / 86

Video Recorder 400 Series Operating instructions | en 39
Bosch Security Systems Installation and Operation manual F.01U.168.054 | v1.1 | 2010.06
5.7.3 Smart search
1. From a Date/Time search, press the exit key to select the Search Tabs.
2. Press the left/right arrow keys to select Smart Search.
3. Press the enter key to activate the search.
– With the mouse, click the Smart Search tab to make it active.
Search criteria
– Under Channel , specify the camera input to search for. The selected input will be shown.
– Under Start and End , fill in date and time values to determine the time span of the
search.
– Set Sensitivity to determine the threshold for detecting change in the video.
– Set Area to limit the smart search to only the area effected.
– Select Search to start the search.
Search results
– The recording fitting the filter and closest to the selected date and time is shown first.
–
If more events than can be shown on the page are found, use Page to see more
results.
Figure 5.9 Search menu - Smart search options
– Use the up/down arrow keys to move through the list.
– Press the Play button for a full-screen playback of the selected recording.
Smart Search results
The smart search results are indicated by a start and stop time of a small period of video.
Within this period of video the smart search results can be found. See
Section Table 6.3 Pre-
event recording examples, page 51 to get an indication of the recording times of these periods
of video.