Bosch DVR-451-04A050, Инструкция по установке и эксплуатации

Страница: 38 / 86

Video Recorder 400 Series Operating instructions | en 38
Bosch Security Systems Installation and Operation manual F.01U.168.054 | v1.1 | 2010.06
5.7.2 Event search
1. From a Date/Time search, press the exit key to select the Search Tabs.
2. Press the left/right arrow keys to select Event Search.
3. Press the enter key to activate the search.
– With the mouse, click the Event Search tab to make it active.
Search criteria
– Under Start and End , fill in date and time values to determine the time span of the
search.
– Under Channel , specify the camera input to search for. The selected input will be shown.
– Set Event Type to search for alarm events, motion events, or both. Set to All so that the
search is not restricted by an event type.
– Select Search to start the search.
Search results
– The recording fitting the filter and closest to the selected date and time is shown first.
–
If more events than can be shown on the page are found use Page to see more
results.
– Use the up/down arrow keys to move through the list.
– Press the Play button for a full-screen playback of the selected recording.
Figure 5.8 Search menu - Event Search options
Event Search results
The event search results are indicated by a start and stop time of a small period of video.
Within this period of video the event search results can be found. See
Section Table 6.3 Pre-
event recording examples, page 51 to get an indication of the recording times of these periods
of video.