Bosch DVR-451-04A050, Инструкция по установке и эксплуатации

Страница: 35 / 86

Video Recorder 400 Series Operating instructions | en 35
Bosch Security Systems Installation and Operation manual F.01U.168.054 | v1.1 | 2010.06
5.6.3 Main menu
Camera
The Camera menu is used to configure recording settings for the unit. The menu contains
eight submenus:
– Camera - per camera Enable, Name of the camera, Covert, and Audio
– Video Adjustment - per camera Brightness, Contrast, and Color
– PTZ - per camera Port, Address, Protocol, and Baud Rate
– Continuous Recording - per camera Resolution, Quality, and Frame Rate
– Input Recording - per camera Resolution, Quality, Frame Rate, Pre-event, and Post-
event
– Motion Recording - per camera Resolution, Quality, Frame Rate, Pre-event, and Post-
event
– Network Live Streaming - per camera Enable, Resolution, Quality, and Frame Rate
– Video Format - NTSC, PAL, or Auto Detect; VGA Output - select required VGA
resolution
Schedule
The Schedule menu is used to set recording types according to the hour and day of the week
and for exception days.
Display
The Configuration menu contains three submenus:
–
Language - set the language option for the unit
– Monitor A - show Camera Name and Status, Date and Time, Playback and HDD Status,
and configure Sequence Dwell Times
– Monitor B - show Camera Name and Status, Date and Time, and configure Sequence
Dwell Times
Event
The Event menu contains four submenus:
–
Input - per input Input Type, Camera, Relay Output, and PTZ preset
– Motion - per camera Sensitivity, Relay Output, and Area setup
– Alarm Acknowledge - Toggle between Post-event time and Manual
– System - enable alarms for Disk fail, Disk full, Fan fail, System/Disk temperature,
Administrator Password change, Video loss, and Power On.
Network
The Network information menu contains four submenus:
–
TCP/IP - enable DHCP, set IP Address, Subnet, Gateway, DNS, HTTP Port, and Bandwidth
limit
– DDNS - set dynamic DNS for dyndns.org, sitesolutions.com, and tzo.com
– Notification - send e-mail notification on Input, Motion detect, Disk fail, Disk full, Fan fail,
System/Disk temperature, Administrator Password change, Video loss, Power On
– Mail - set SMTP server, SSL, User name, Password, To 1-3, From, and Subject.
System
The System information menu contains seven submenus:
–
Date/Time - set Date, Time, Date format, Time format, Time zone, and Daylight Savings
– NTP - set NTP Time Server and Sync interval
– Beeper - set unit to beep on Button, Input, Motion, System, or Video loss
– User - set Usernames, Passwords, and User Levels for Users 1-10