Bosch DVR-451-04A050, Инструкция по установке и эксплуатации

Страница: 31 / 86

Video Recorder 400 Series Operating instructions | en 31
Bosch Security Systems Installation and Operation manual F.01U.168.054 | v1.1 | 2010.06
5.4 Viewing pictures
The unit has two monitor outputs, A and B. The way in which these monitors display pictures
depends on how the system is configured.
5.4.1 Monitor A
Monitor A is the main monitor. It shows full-screen or quad multiscreen live, or playback
camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed
on this monitor. When the menu system is activated, it is displayed on this monitor. Monitor A
is the default monitor for keyboard and mouse commands.
5.4.2 Monitor B
Monitor B displays full-screen or a sequence of live pictures. When an alarm or motion input is
detected, the camera picture with the Alarm/Motion indicator can be displayed on monitor B.
When multiple alarms or motion occur, camera pictures are sequenced on monitor B.
Changing the display on Monitor B
To control the display on monitor B:
1.
Bring up the System Control Bar.
2. Click the Monitor B button.
3. From the pop up menu, select the display for Monitor B
–
Select 1-4 for the corresponding Camera
– Select the sequence key to sequence channels 1-4
5.4.3 Viewing
The drawing shows all possible views for monitor A.
Figure 5.4 DVR 400 Series supports single and quad screen viewing
Multiscreen
To view quad displays on monitor A:
– Press the quad key.
– A quad display of camera pictures appears on the active monitor.
Full-screen
To view a full-screen shot of a camera:
–
Press a camera key.
–
A full-screen shot of the analog camera that was selected appears.
Sequence
To view a sequence of live camera pictures of several cameras:
1. Press the sequence key.
– A sequence of camera pictures appears, each for a pre-programmed dwell time.
Quad Single
1
1 2
3
4