Bosch DIVAR IP 7000 1U, Руководство по установке

Страница: 3 / 42

Table of contents
1
Safety precautions 5
1.1 General safety precautions 5
1.2 Electrical safety precautions 6
1.3 ESD precautions 7
1.4 Operating precautions 7
1.5 Important notices 8
1.6 FCC and ICES compliance 8
2 System overview 9
2.1 Chassis features 9
2.2 Chassis components 9
2.2.1 Chassis 9
2.2.2 Backplane 10
2.2.3 Fans 10
2.2.4 Mounting rails 10
2.2.5 Power supply 10
2.2.6 Air shroud 10
2.3 System interface 10
2.3.1 Control panel buttons 11
2.3.2 Control panel LEDs 11
2.3.3 Power supply LEDs and overheat indicators 12
3
Inserting hard disks 13
4
Rack installation 14
4.1 Unpacking the system 14
4.2 Preparing for setup 14
4.2.1 Choosing a setup location 14
4.2.2 Rack precautions 14
4.2.3 General system precautions 15
4.2.4 Rack mounting considerations 15
4.3 Rack mounting instructions 16
4.3.1 Identifying the sections of the rack rails 16
4.3.2 Installing the inner rails 17
4.3.3 Assembling the outer rails 17
4.3.4 Installing the outer rails to the rack 18
4.3.5 Installing the chassis into the rack 19
4.3.6 Installing the chassis into a Telco rack 20
4.4 Turning on the system 20
5 System setup - first steps 21
5.1 Introduction 21
5.2 Setup instruction 21
5.3 Starting the application 21
5.4 Using Bosch VMS Config Wizard 22
5.5 Adding additional licenses 23
5.6 Using Bosch VMS Operator Client 23
6 Installing additional drives 25
6.1 Adding new drives to Windows Server 25
6.2 Creating a VHD iSCSI target for VRM 25
6.3 Adding and formatting the VHD as a VRM target 26
DIVAR IP 7000 1U Table of Contents | en 3
Bosch Sicherheitssysteme GmbH Installation Manual 2014.12 | V3 | DOC