Bosch DIVAR IP 7000 1U, Руководство по установке

Страница: 25 / 42

Installing additional drives
After physical drive mounting has been performed, the following configurations must be
performed for the drives to be accessible to both the operating system and Bosch Video
Recording Manager (VRM).
–
Adding new drives to Windows Server
– Creating a VHD iSCSI target for VRM
– Adding and formatting the VHD as a VRM target
See also:
–
Inserting hard disks, page 13
– Adding new drives to Windows Server, page 25
– Creating a VHD iSCSI target for VRM, page 25
– Adding and formatting the VHD as a VRM target, page 26
Adding new drives to Windows Server
To add new drives to Windows server:
1.
On the Bosch VMS default screen, press CTRL+ALT+DEL, then hold down SHIFT while
clicking the Switch User option and keep SHIFT pressed for about five seconds.
Note: To perform administrative tasks, the BVRAdmin account can be entered
2. In the taskbar, click Server Manager. The Server Manager window is displayed.
3. In the left pane, expand Storage, then click Disk Management.
The added hard drisk appear as Unallocated.
4. Right-click the Unallocated disk, then click New Simple Volume.
The New Simple Volume Wizard dialog box is displayed.
5. In the Welcome dialog box, click Next.
6. In the Specify Volume Size dialog box, allow all of the automatically allocated space and
click Next.
7. In the Assign Drive Letter or Path dialog box, click Assign the following drive letter,
enter the drive letter assigned to the new drive, then click Next.
8. In the Format Partition dialog box make sure the following settings are correct, then click
Next.
–
File system: NTFS
– Allocation unit size: Default
– Volume label: New Volume
– The Perform a quick format check box must be selected.
9. In the Summary dialog box, click Finish.
The description of the new drive changes to Healthy (Primary Partition).
Creating a VHD iSCSI target for VRM
To create a VHD iSCSI target for VRM:
1.
On the Bosch VMS default screen, press CTRL+ALT+DEL, then hold down SHIFT while
clicking the Switch User option and keep SHIFT pressed for about five seconds.
Note: To perform administrative tasks, the BVRAdmin account can be entered
2. In the taskbar, expand Microsoft iSCSI Software Target, expand iSCSI Targets, then
click the TG0 icon.
All existing virtual disks are displayed with their LUN numbers.
3. Right-click the TG0 icon, then click Create Virtual Disk for iSCSI Target.
The Create Virtual Disk Wizard dialog box is displayed.
4. I n the Welcome dialog box, click Next.
6
6.1
6.2
DIVAR IP 7000 1U Installing additional drives | en 25
Bosch Sicherheitssysteme GmbH Installation Manual 2014.12 | V3 | DOC