Bosch DIVAR AN 5000, Руководство по эксплуатации

Страница: 101 / 170

The other buttons on the bottom of the screen are used to assign and activate a set of
movements for the camera as follows:
1.
Enter a number (from 1 to 999) in the right field (this will be the ID for the preset PTZ
movements for the camera).
2. Use the eight direction arrows to swivel the camera to a desired position.
3. Click <Set> to assign the final position to the ID.
4. You will be asked to save the preset (use the focus button to save). This preset can be
eventually added to the PTZ activation sequence if an alarm is detected – see Detect, page
62.
5. If required press <Shot> to move the camera immediately to a preset ID position.
The Aux buttons are used when activating an ID for special processes stored in the camera
–
Aux On: refer to your camera manual for the Aux definition.
– Aux Off: switch off the special Aux definition
See also
–
Detect, page 62
Sequence
Setup the camera sequence and interval times in the following configuration screens:
–
For monitor A - see Sequence Mon. A, page 69
– For monitor B – see Sequence Mon B, page 86
Activate sequence on monitor A
1.
To view a sequence of live camera pictures from several cameras:
–
Right-click the mouse to access the Quick menu
– Choose Sequence on
2. Check that a sequence of camera pictures appears,
3. To stop sequencing, right-click the mouse to access the Quick menu, and choose
Sequence off
See also
–
Sequence Mon. A, page 69
– Sequence Mon B, page 86
Monitor A
Monitor A shows live pictures of connected cameras in full-screen or multiscreen, plus status
messages and alarm events (e.g. motion and video loss warnings). When multiple events
occur, camera pictures can also be sequenced on monitor A to follow the events.
The search/play function and all user menus are also activated on this monitor.
Monitor B
Monitor B displays live pictures in full-screen (multiscreen is possible if a multiple-view
sequence is enabled on Mon B). If an alarm/detect event is signaled, the camera picture with
the event can be displayed on monitor B. When multiple events occur, camera pictures can
also be sequenced on monitor B to follow the events.
7.2.3
7.2.4
7.2.5
DIVAR AN 3000 / DIVAR AN 5000 Operating instructions | en 101
Bosch Security Systems Operations Manual 2015.10 | v2.3 | AM18-Q0669