Bosch DIVAR AN 5000, Руководство по эксплуатации

Страница: 75 / 170

System events
Figure 6.31: System events
Use this menu to setup how the system reacts to different system events.
–
Event type: choose from
–
Disk error
– No disk
– No space on disk
– NET disconnection
– IP conflict
– MAC conflict
– Bad video signal
– Enable: select to enable the system event chosen in the above field.
– Alarm out: select the alarm activation output port(s) (maximum of 3 on DIVAR 3000; 6 on
DIVAR 5000).
– Latch: set a delay time (from 10 seconds (default) to 300 seconds) before the system
automatically turns off the alarm and the activated output after the external alarm is
cancelled.
– Show message: system will pop up a message on the local screen to alert you when an
alarm occurs.
– Alarm upload: (this option is only shown for the events ‘no disk’ and ‘no space on disk’):
system will upload the alarm signal to the network.
– Send email: system will send an email to alert you when an alarm occurs.
– Buzzer: the buzzer alerts you when an alarm occurs.
6.14
DIVAR AN 3000 / DIVAR AN 5000 Configuration | en 75
Bosch Security Systems Operations Manual 2015.10 | v2.3 | AM18-Q0669