46
en | Maintenance
DIVAR IP all-in-one 7000 (2U)
2019.08 | V1 | DOC
Installation manual
Bosch Security Systems B.V.
2.
Remove all cable connections to the power supply from the motherboard, backplane, and
other components. Also, remove both power supplies.
3.
Locate the power distributor between the power supply and the fan row.
4.
Remove the three screws securing the power supply.
5.
Gently pull the power distributor from the chassis. Gently guide all the cables through the
power distributor housing.
6.
Slide the new power distributor module into the power distributor housing. Make that
you slide the cables through the bottom of the housing.
7.
Reconnect all the power cables, replace the power supply, and insert the plug into the
wall.
9.16
Monitoring the system
The system provides tools for health monitoring.
To activate the monitoring functionality, you have to logon to the administrator account
(BVRAdmin).
1.
On the BVMS default screen, press CTRL+ALT+DEL.
2.
Hold SHIFT, click
Switch User
and keep SHIFT pressed for about five seconds.
3.
Enter user name and password.
4.
On the Desktop, in the
Tools
folder, right-click the
Enable_SuperDoctor_5_Service
script,
and then click
Run as administrator
.
5.
Double-click the
SuperDoctor 5 Web
icon in the same folder.
6.
Log on to the web interface using the following default credentials:
User Name: ADMIN
Password: ADMIN
7.
Click the
Configuration
tab, and then click
Password Settings
and change the default
password.
8.
Click the
Configuration
tab, and then click
Alert Configuration
.
9.
Activate the
SNMP Trap
feature and specify the IP address of the receiver for SNMP
traps.
9.17
Recovering the unit
Following procedure describes how to restore the factory default image.
To restore the unit to factory default image:
1.
Start the unit and press
F7
during the BIOS power-on-self-test.
The Recovery menu is displayed.
2.
Select one of the following:
–
Initial factory setup:
restores to factory default image and deletes all data on the
HDDs.
or
–
System Recovery (back to Factory Defaults):
restores to factory default image; data
on the HDDs will not be deleted.
Note:
While the
System Recovery
option doesn't delete video footage stored on the data HDDs,
it still replaces the complete OS partition (including VMS settings) with a default
configuration. In order to access existing video footage after recovery, the VMS
configuration needs to be exported before System Recovery and re-imported afterwards.
