16
| English
Field Monitoring | (22.1.19)
Bosch Software Innovations GmbH, Deepfield Connect
Description of the product and
services
Design of the monitoring station
(see figures 1–6 and 8)
Figures 4 and 5 show various installation examples.
1
Safety cap
2
Magnet with LED light
3
Transmitter
4
Status LED
5
Socket
6
M12 plug connection
7
Transmitter cable
8
Transmitter bracket
9
Cable tie
10
Battery
11
Temperature and air humidity sensor B
12
Superseal plug connection
13
Y cable
14
Extension cable
15
Temperature and air humidity sensor A
16
Stake
17
Soil moisture sensor
18
Screw
19
Battery compartment cover
20
Connector with hook lock
Design of the monitoring system (see figure 7)
21
Sensor system (dependent on product variant)
22
Bosch Cloud (data center)
23
Mobile device, e.g. smartphone or tablet with the app
How it works
You can use the sensors to measure the air temperature and
air humidity. The Soil product variants also include a sensor
with which you can measure the soil moisture.
The sensors are connected to the transmitter. The measure-
ment results are transferred from the transmitter to the Bosch
Cloud via the cellular network. This is where the data is pro-
cessed and saved.
An app installed on your mobile device communicates with
the Bosch Cloud. The app provides a clear display of the mea-
sured values. You can set limit values and configure the app to
warn you if these values are exceeded.
The Bosch Cloud can be simultaneously contacted by multiple
persons in different locations using the app. The app and the
Bosch Cloud communicate over the Internet.
Technical data
Transmitter
Cellular network
GSM, D2 Vodafone
Localization
GPS
Battery
– Alkaline manganese
– Not rechargeable
Battery voltage
4.5 V
Battery self-discharge
4 % per year
Weight
0,9 kg
Storage temperature
+5…+40 °C
Permitted relative air humidity
for storage
30… 70 %
Permitted ambient temperature
for operation
–20…+50 °C
Dimensions
200
×
112
×
80 mm
Protection category
IP 67
Temperature and air humidity sensors A and B
Measuring range
– Temperature
– Relative air humidity
–40...+85 °C
0...98 % rH
Measurement accuracy
– Temperature
– Relative air humidity
±0.3 °C
±2 % rH
Weight
0.34 kg
Permitted ambient temperature
for operation and storage
–20...+45 °C
Dimensions
130
×
120
×
105 mm
(without stake)
Protection category
IP 65
Sensor connecting cable
73 cm
Soil moisture sensor
Weight
0.1 kg
Permitted ambient temperature
for operation and storage
–40...+50 °C
Dimensions
51
×
24
×
21 mm
Protection category
IP 67
Cable length
40 cm
App Deepfield Connect – Field Monitoring
Hardware requirements
Mobile device
(tablet, smartphone)
Operating system
– Android 5.0
(and later)
– iOS 10.0 (and later)
