manualshive.com logo in svg

Bosch D7412G, Руководство по эксплуатации и установке

"Radionics D7412G" - высококачественная система безопасности, предоставляющая надежную защиту вашего дома или бизнеса. Для полного понимания работы устройства скачайте бесплатное "Operation And Installation Manual" на manualshive.com. Запустите полноценный мониторинг с данной инструкцией.

Поделиться
Скачать
background image

Bosch Security Systems | 10/03 | 43488E

EN | 

42

D9412G/D7412G 

| Operation & Installation Guide |

8.3.7

Program Record Sheet

The first column on the D9412G/D7412G Program Record
Sheet contains the switch settings for the D8127 POPITs.
Switches are numbered 1 to 6, left to right on the D8127
POPIT. Switches are numbered 0 to 6, left to right on
the D9127 POPIT. Set the switches whose numbers
appears in the setting to the ON position. Set the
switches with a dash (-) in the switch position to the
OFF position. See Figure 16.

The second column contains the translation of the point
number into the ZONEX format. See Point User Flag in
the D9412G/D7412G Program Entry Guide for an
explanation of this feature.

The third column contains the point number as it is
displayed at command centers.

The fourth column contains the point index. See Point
Index Parameters in the D9412G/D7412G Program Entry
Guide for an explanation of the point index.

The fifth column of the Program Record Sheet shows the
area the point is assigned to.

The sixth column shows the debounce count for the
point. See Debounce Count in the D9412G/D7412G
Program Entry Guide.

The seventh column shows the BFSK report code,
which is the point number reported for this point when
the panel is using the BFSK format.

The eighth column contains the text displayed at
command centers for the point. The text is transmitted
to the receiver when the panel is using the Modem IIIa

2

format.

POPIT Labels

D9412G off-board points are numbered 9 to 127 and 129
to 247 (D7412G uses Points 9 to 75 only). The D9412G
reserves Points 128 and 248 for internal use. POPITs
must be connected for Points 129 to 247 to expansion
loops connected to POPEX #2.

Two sheets of peel-off POPIT labels are supplied with
the D8125 POPEX Module. Use the sheet marked
“Bank1” for Points 9 to 127. Use the sheet marked
“Bank2” for Points 129 to 247.

Each label has two parts. Place the smaller part (with
only the point number) on the chip. Place the larger part
(with the switch settings) on the base of the POPIT. Set
the switches and cover the POPIT.

Do not program two POPITs for the same point
number. After programming all the points, perform a
Service Walk Test. The D9412G/D7412G/D7212G
Installation and Troubleshooting Quick Reference Guide
contains instructions for performing a Service Walk Test.
If a point does not test, check the programming for a
duplicated address.

Walk Test Does Not Show Extra Points:

 

Only the

Service Walk Test shows extra points. If the point
assignment switches on a POPIT or OctoPOPIT are set
incorrectly, it can create both missing and extra points.
If the same point number is assigned to two or more
POPITs or OctoPOPITs, none of the points with that
number test correctly.

8.0 Off-Board Points

Figure 16: Program Record Sheet

D9412G/D7412G  | Program Record Sheet  | RADXPNTS Handler

EN | 25

Default values are shown in ( ) or in

bold

 Default values are shown in ( ) or in bold

Point Assignments (001 through 040)

POPIT Switch

Setting

Trans-

lation

Point

#

Point

Index

Area

Assign

Debounce

BFSK/

Relay

Custom Point Text

100

001

(3)

_ _

(1)

___

(2)

_____

(1)

____

P1 FIRE

___________________

200

002

(1)

_ _

(1)

___

(2)

_____

(2)

____

P2 PANIC

___________________

300

003

(25) _ _

(1)

___

(2)

_____

(3)

____

P3 DELAY

___________________

400

004

(13) _ _

(1)

___

(2)

_____

(4)

____

P4 FOLLOW ___________________

500

005

(7)

_ _

(1)

___

(2)

_____

(5)

____

P5 INSTANT ___________________

600

006

(7)

_ _

(1)

___

(2)

_____

(6)

____

P6 INSTANT ___________________

700

007

(7)

_ _

(1)

___

(2)

_____

(7)

____

P7 INSTANT ___________________

800

008

(7)

_ _

(1)

___

(2)

_____

(8)

____

P8 INSTANT ___________________

0 1 2 3 4 5 6

101

009

__ __

(1)

___

(2)

_____

(1)

____

P9

___________________

Содержание D7412G













































































Отзывы:

Нет отзывов

Похожие инструкции для D7412G

ABB ControlMaster CM15 Commissioning Instructions preview
ControlMaster CM15
Бренд: ABB Страницы: 28
Daikin BRC1H71W Installation Manual preview
BRC1H71W
Бренд: Daikin Страницы: 38
Daikin BRC1H71W Operation Handbook preview
BRC1H71W
Бренд: Daikin Страницы: 2
Daikin BRC1E72 Operation Manual preview
BRC1E72
Бренд: Daikin Страницы: 148
Daktronics RC-100 Operation Manual preview
RC-100
Бренд: Daktronics Страницы: 52
Waeco RC-100 Installation And Operating Instructions Manual preview
RC-100
Бренд: Waeco Страницы: 20
Z-Wave RC-100 Operating Instructions Manual preview
RC-100
Бренд: Z-Wave Страницы: 56
Salda TPC User Manual preview
TPC
Бренд: Salda Страницы: 16
Laars SC6 Installation And Operation Instructions Manual preview
SC6
Бренд: Laars Страницы: 28
Valcom V-2003A Technical Specifications preview
V-2003A
Бренд: Valcom Страницы: 3
Valcom V-1092 User Manual preview
V-1092
Бренд: Valcom Страницы: 3
Valcom V-1092 Technical Specifications preview
V-1092
Бренд: Valcom Страницы: 2
J+J J4C S20 Quick Start Manual preview
J4C S20
Бренд: J+J Страницы: 4
Val Controls I 24-AF Series Replacement Manual preview
I 24-AF Series
Бренд: Val Controls Страницы: 6
µ-Dimension D3208 User Manual preview
D3208
Бренд: µ-Dimension Страницы: 48
µ-Dimension D4006 Installation Instructions preview
D4006
Бренд: µ-Dimension Страницы: 2
Full Gauge Controls MT-543Ri LOG Manual preview
MT-543Ri LOG
Бренд: Full Gauge Controls Страницы: 3
RKC INSTRUMENT FAREX SR MINI SYSTEM Communication Instruction Manual preview
FAREX SR MINI SYSTEM
Бренд: RKC INSTRUMENT Страницы: 82

Бренды по названию

Популярные бренды

Загрузить еще бренды